EChart Image Release History
	Version	Release Date		Changes
	6.09.00	3/7/2008		1. Add Extended Modbus Addressing
	6.08.25	9/12/2007		1. Correction - Hour/Day/Month Program Variables
	6.08.24	6/1/2007		1. Correction - Adudit Trail Report - Flowing Density Override
	6.08.23	9/20/2006		1. Read Rosemount Transmitter Type
	6.08.22	8/16/2006		1. Add Custom Storage Hourly Report
				2. Correction - Bluetooth Re-Connection
				3. Correction - Flowing Density Override
	6.08.21	3/17/2006		1. Add Flow Unit - CF, M3
				2. Add Event Status
				3. Add Bluetooth
	6.08.20	1/19/2006		1. Add Enron Modbus Audit/Alarm Date Format Option
				2. Correction - Graphic Display - Daily FWA Value
	6.08.19	12/8/2005		1. Correction - Enron Modbus
	6.08.18	11/18/2005		1. Add Support for Rosemount Flow Conditioner - 1595
	6.08.17	7/5/2005		1. Correction - Steam Energy Flow Calculaltion
				2. Correction - Display Unit is Based on the Flow Unit Selection
				3. The Size of Data Verification is Increased to 100
	6.08.16	3/22/2005		1. Add Daylight Saving Time Option
				2. Add Steam Calculation
				3. Add New Modbus Registers - Yesterday's Flow Time in Minutes and in Seconds
				4. Add Graphical DFM Logo
				5. Check SG Limit only if AGA8 Gross Method 2 Is Used.
	6.08.15	11/22/2004		1. Add Orifice Plate Status Input Selector
				2. Add V-Cone Linear Flow Coefficient Factor
	6.08.14	10/27/2004		1. Correction - AGA8 Gross Method 2 (From V.6.08.1 to 6.08.13)
	6.08.13	10/16/2004		1. Add Frequency Reading Without Any Assignment
	6.08.12	10/12/2004		1. Modify Boolean/Program Variable Statements
				2. Modify Modbus Shift Routine
				3. Add Analog Output Percentage Remote Control Modbus Registers (7049, 4653)
	6.08.11	9/27/2004		1. Add Time Clock in 16 Bits Modbus Registers
	6.08.10	9/3/2004		1. Add Calibration Parameters to be Part of the Configuration Software
	6.08.9	9/1/2004		1. Add Slow Pluse Application
				2. Add Error Checking Routine for Retrieving  Daily Data of Month (Modbus Address 3004)
	6.08.8	8/25/2004		1. Add MMCF/KKM3 Option for Display Variables Only
				2. Delete Program Variable Text
	6.08.7	8/12/2004		1. Add TPU Frequency Counter
				2. Add Modbus Address 3004 for Requesting Previous Day of Last or Current Month Data
	6.08.6	8/2/2004		1. Add Annubar and Verabar Flow Equations
	6.08.5	4/29/2004		1. Add New Modbus Registers - Current Month Flow Data and Flow Time
	6.08.4	3/30/2004		1. Correction - Historical Data Collection
	6.08.3	3/18/2004		1. Correction - Update Hourly, Daily, and Monthly Total Display Variables
	6.08.1	3/12/2004		1. Add IEEE Floating Point Modbus Selection 0=One 32 bits, 1=Two 16 bits Data
				2. Add IEEE Floating Point Modbus Sequence 0=HI,LO 1=LO,HI Bytes
	6.08.0	1/28/2004		1. Correction - Updating Date
	6.07.9	1/21/2004		1. Add Image Version Display Selection
	6.07.8	1/12/2004		1. Correction - Historical Hourly/Daily Floating Point Registers
	6.07.7	1/2/2004		1. Correction - Reset 19200 Baud Rate back to 9600 Baud Rate
				2. Correction - RS 485 Port Initialization
	6.07.6	12/9/2003		1. Add Last 2 Hours Minutes Data
				2. V-Cone Fow Equation - Add Y Factor Selection, Cone Thermal Coefficient
				3. Correction - PID Control, Not to Use Pressure Loop
	6.07.5	11/7/2003		1. Volume Roll Over at 999999999
				2. Correction - Audit Report Pipe/Orifice ID with 5 Decimal Places
				3. Store Time Averaged Temperature and Pressure When There is No Flow
	6.07.4	10/13/2003		1. Add Gas or Liquid Application Selection
				2. Add Flowing Density Override
	6.07.3	10/9/2003		1. Add Second RS-232 Port
	6.07.2	10/1/2003		1. Add Slotted DP Meter Calculation
				2. Add Auxiliary Meter Variables
				3. Add New Modbus Registers
	6.07.1	9/15/2003		1. Correction -  16 Bits Modbus Shfit
				2. Increase Stack
				3. Add New Modbus Registers - Last Month Total, Yesterday's Total, Last Hour Total
	6.07.0	9/9/2003		1. Correction - Hourly Archive Data
	6.06.9	7/24/2003		1. Improve Real Time Clock Accuracy
	6.06.8	7/1/2003		1. Add Event Pointers Which Have Occurred Since The Last Event Log Request Are Not Cleared
				2. Correction - Program Variable Statements
				3. Correction - Hourly Data Date If Day Is Not Started at Midnight)
	6.06.7	5/14/2003		1. Correction -  Historical 64 Days Data (Hour by Hour, 24 Hours)
	6.06.6	4/9/2003		1. Add Slow Pulse Option
	6.06.5	4/1/2003		1. Add Enron Modbus Protocol - Historical Hourly, Daily, and Alarm/Event Registers.
				2. Changes - Up to 100 Historical Alarm and Audit Reports Are Stored.
	6.06.4	12/17/2002		1. Correction - Pressure and Temperature Manual/Live Bits
	6.06.3	11/21/2002		1. Correction - Update PID Ananlog Output MA Value
	6.06.2	9/5/2002		1. Correction - Graphic Screen - Averaged Flow Rate
	6.06.1	8/1/2002		1. Set auxiliary meter data if status input assignment is 5.
	6.06.0	7/20/2002		1. Add Historical 64 Days Data (Hour by Hour, 24 Hours)
	6.05.2	7/1/2002		1. Add 701,703, and 704 Data Packets - Historical Hourly and Daily Data.
	6.05.1	6/28/2002		1. Add "Gross/Turbne" Text If Auxiliary Meter Is Selected.
	6.05.0	6/11/2002		1. Correction - Default to US Unit
	6.04.0	5/28/2002		Add New Data Entries
				1. Metric Pressure Unit Selection - BAR, KG/CM2, or KPA
				2. Metric DP Unit Selection - m.BAR, or KPA
				3. Auxiliary Meter K Factor
	6.03.4	5/6/2002		1. Add Frequency Input
	6.03.3	4/23/2002		1. Add Bit Map for Each Hour - Hourly Historical Data
	6.03.2	4/12/2002		1. Add Calibration Verfication Report
	6.03.1	4/9/2002		1. Add Bit Map for Indication That Maintenance Value Being Used.
				2. Correction - AGA8 Gross Method #1/Gross Method #2
				3. Correction - Graphic Daily Flow Rate Trend
	6.03.0	3/7/2002		1. Add 101s Data Packet - Hourly Historical Data
				2. Add 411s Data Packet - Daily Historical Data
	6.02.0	3/2/2002		1. Increase Daily Totalizer Resolution
	6.01.2	2/15/2002		1. Graphic Maximum Value  Net Flow Rate
				2. Change MCF/Hour to MCF/Day
	6.01.1	2/11/2002		1. Add Data Entry - Water Factor Override
	6.01.0	2/6/2002		1. Read Data and Time from Real Time Clock
				2. Add Analog Output Routine