E-PLUS Image Release History
Version Release Date   Changes
8.00.19 4/12/2008   1. Correction -  ISO5167-2003 Factors
       
8.00.18 3/11/2008 1. Correction - Reset Spare Data Variables
   
8.00.17 9/12/2007   1. Add ISO5167-2003 Equation
       
8.00.16 9/12/2007   1. Correction - Historical Hourly Program Variables
   
8.00.15 8/20/2007   1. Correction - Verification Report - RTD/Analog Inputs
   
8.00.14 6/27/2007   1. Correction - External RTD Diagnosis
   
8.00.13 6/15/2007   1. Add Factory Test
       
8.00.12 10/6/2006   1. Correction - Wrong Version Number 
  2. New Rosemount Average Rountine
       
8.00.11 9/22/2006   1. Read Rosemount Transmitter Type
       
8.00.10 8/16/2006   1. Correction - Bluetooth Re-Connection
  2. Disable Plunger Checking in Diagnostic Mode
  3. Add Plunger Start Delay Timer
       
8.00.09 5/19/2006   1. Add Barrel Flow Unit Selection
  2. Correction - Plunger Lift Stage Flag
       
8.00.08 5/3/2006   1. Add Saturated Steam Calculation
  2. Add Venturi Equation
  3. Add Plunger Lift Early Arrival Protection 
  4. Add Audit Trail Entries - Date, Time, and Heating Value Override
  5. Add Bluetooth
       
8.00.07 4/3/2006   1. Add Customer Storage Option
  2. Add Time Based Plunger Lift Control
  3. Add Flow Unit Selection - M3 and CF
       
8.00.06 1/19/2006   1. Correction - Graphic Display - Daily FWA Value
       
8.00.05 7/19/2005   1. Add Flow Set Point Selection for PID Control
       
8.00.04 7/5/2005   1. Correction - Steam Energy Flow Calculation
  2. Correction - Display Unit is Based on the Flow Unit Selection
       
8.00.03 3/22/2005   1. Add New Modbus Registers - Yesterday's Flow Time in Minutes and in Seconds
  2. Correction - Active Alarms (Display)
  3. Check SG Limit only if AGA8 Gross Method 2 Is Used.
  4. Add Graphical DFM Logo
       
8.00.02 3/8/2005   1. Add - Daylight Saving Time Option
  2. Add - Steam Calculation
  3. Add - 5 Sets of Program Variable Statements
  4. Change - Save up to 840 Historical Hourly Reports.
       
8.00.01 1/6/2005   1. Set Auxiliary Meter Default to Zero
  2. Add Orifice Plate Selector
  3. Add BS&W Input
       
8.00.00 11/1/2004   1. First Release