MICROMVL Image Release History
	Version	Release Date		Changes
	6.10.07	5/20/2008		1. Add Multivar.DP Flow Direction Indication Delay
	6.10.06	5/2/2008		1. Correction - NIST14 Fluid Mixtures
				2. Expand Range of NIST14 Calculation
	6.10.05	3/11/2008		1. New Rosemount Average Routine
				2. Modify Audit Trail Report Routine
				3. Add Reverse Hour/Daily Totalizer
	6.10.04	1/15/2008		1. Correction - API2565-Proplene/Ethylene for Version 6.10-6.10.3
	6.10.03	1/9/2008		1. Modify GPA-TP15(2007)
	6.10.02	10/4/2007		1. Add Yesterday Day and Last Hour Modbus Registers
	6.10.01	5/25/2007		1. Diagnostic Screen - Display Density in GM/CC
	6.10.00	3/20/2007		1. Add - API 2004 Crude/Refined/Special Product Tables(Replacements for 5/6,23/24).
				2. Correction - New Table 23/24 (Replacements for OLD Table 23/24)
	6.09.14	1/8/2007		1. Modify Display Sensitivity Key Routine
	6.09.12	6/30/2006		1. Add - Apply Density Correction Factor to mA Density
				2. Correction - Gravity Out of Range Volume Re-Calculation for a New Product
	6.09.11	2/3/2006		1. The Size of Historical Daily Data is Increased to 35
	6.09.10	1/10/2006		1. Add Digital Input/Output #4 Option
	6.09.09	10/4/2005		1. Correction - Analog Input 1-4 Reading (Version 6.09.08)
	6.09.08	8/23/2005		1. Add Analog Input Expansion Option
	6.09.07	7/19/2005		1. Correction - Station Display Unit Text
	6.09.6	3/31/2005		1. Correction - Flow Rate Scale Data
				2. Increase Range of NIST14 Density Calculation
	6.09.5	2/22/2005		1. Add - Daylight Saving Time Option
				2. Correction -Save Daily Total on Daily Batch Report
	6.09.4	1/10/2005		1. Add - Batch Report and Daily Report Show Cumulative Total
				2. Add - Disable Interval Report If Threre Is No Flow During The Batch.
	6.09.3	12/22/2004		1.Correction - PPMIX Using Live Densitometer
	6.09.2	11/24/2004		1. Modify Modbus Shift Routine
				2. Modify Boolean Statement/Program Variable Statement Routine
				3. Add Battery Voltage Reading
				4. Enable/Disable Front Panel Scan Key
				5. Enable/Disable Display Backlight Function
				6. Correction - Venturi Y Factor
				7. Add Calibration Parameters to be Part of the Configuration Software
	6.09.1	8/26/2004		1. Add - V-Cone Flow Equation
	6.09.0	8/4/2004		1. Add - TPU Frequency Counters
				2. Correction - Modbus ASCII Mode
	6.08.9	5/20/2004		1. Add - Net and Mass Cumulative Modbus Registers
				2. Correction - Broadcast Command
	6.08.8	10/27/2003		1. Set RAM/ROM Wait State to 1
	6.08.7	9/26/2003		1. Modify PPMIX Range
				2. Add Flow Direction Override Modus Register
				3. Increase Stack
				4. Correction -  16 Bits Modbus Shfit Offset
	6.08.6	8/26/2003		1. Add - Change Flow Direction Through Modbus
	6.08.5	8/7/2003		1. Improve Multi.Variable Interface Routine
	6.08.4	7/21/2003		1. Add - WatchDog Timer (3022)
	6.08.3	7/9/2003		1. DP direction indication is based on 5 seconds averaged dp
	6.08.2	6/10/2003		1. Modify Audit Trail Report - Add Net and Mass Cumulative Total
	6.08.1	1/15/2003		1. Increase Modbus Shift Range from 5001 to 5119
	6.08.0	11/8/2002		1. Add Status Input Assignments - Display Toggle/Display Freeze
				2. Add 5071-5079 Program Variables (1 Decimal Inferred)
				3. Add New Modbus Registers - Gross, Net, Mass Volume (One Second)
	6.07.9	10/31/2002		1. Correction - New 23/24 Table Iteration Routine (Using Live Densitometer)
	6.07.8	10/30/2002		1. Correction - New 23/24 Table Iteration Routine (Using Live Densitometer)
	6.07.7	10/11/2002		1. Correction - Analog Input Routine
	6.07.6	9/6/2002		1. Increase DP Range of Multi-Variable to 1075
	6.07.5	8/3/2002		1. Correction - Use Densitometer Pressure, not Meter Pressure
	6.07.4	6/3/2002		1. Correction - Multi-Variable DP Calibration
				2. Correction - Analog Input Calibration
	6.07.3	3/18/2002		1. Add New Last Month Report
				2. Delete Batch Schedule Routine
	6.07.2	2/18/2002		1. Add New Modbus Registers - Digital In/Output Bits
	6.07.1	1/3/2002		1. Set Wait State to 2
	6.07.0	12/20/2001		1. Add Linear Meter Factor Routine (Reverse Direction)
	6.06.9	12/11/2001		1. Add New Modbus Registers - Forward/Reverse Lineaer Meter Factor
	6.06.8	11/28/2001		1. Correction - Table 24C - Alpha T Calculation
	6.06.7	11/10/2001		1. Add New Modbus Registers - Last Batch Data
	6.06.6	10/23/2001		1. Correction - RTD Calibration
	6.06.5	10/2/2001		1. Increase Baud Rate to 19200
	6.06.4	9/15/2001		1. Add Mass Pulse Selection
	6.06.3	9/10/2001		1. Add Boolean Logic To Do Remote Control
	6.06.2	8/17/2001		1. Correction - Analog Output Maximum
	6.06.1	8/8/2001		1. Revise Communication Routine
	6.06.0	7/16/2001		1. Add New Modbus Registers - Yesterday and Last Batch Data
	6.05.5	7/9/2001		1. Correction - Analog Output Drop
				2. Correction - Slave Alarm Message
				3. Add New Modbus Registers for Previous Batch Data
	6.05.4	7/1/2001		1. Correction - Pulse Output
				2. Correction - Increase RTXC Stack
	6.05.3	6/10/2001		1. Correction - RTD Reading (Increase RTD Gain)
	6.05.2	4/20/2001		1. Correction - Densitometer Alarms
	6.05.1	4/15/2001		1. Correction - Analog Output, PID Alarms
	6.05.0	4/12/2001		1. Correction - UGC2 Calculation
				2. Add Analog Output #1-#4
	6.04.0	2/11/2001		1. Correction - Status Input/Switch Output #1/#4 Setting
	6.03.1	12/22/2000		1. Add RTD Input
				2. Add PPMIX
	6.03.0	11/4/2000		1. Revise RS-485 Routine
	6.02.0	10/10/2000		1. Correction - Switch Output, Spare Data Alarms
	6.01.0	10/5/2000		1. Correction - Density Calculation
				2. Set Data Ready Flag After Retrieving Historical Data