MicroMS4 Release History
	Note: Changes in black mean new features. Changes in red mean corrections from previous versions.
	Version	Release Date		Changes
	2.11	6/27/2007		Add support for Gravity and Base Density Factors
				Corrected Monthly report support for flow time in minutes
	2.10	3/21/2007		Not displaying February's 28 days on monthly reports
	2.9	1/30/2007		Reports skipping records when reports not starting on the last record
	2.8	1/29/2007		Ability to disable Program Variable Statements Validation
				BSW Factor was not being displayed on Daily Report
				Reports not showing right records if reports not starting on the last record
				Updates to Reports:
				Snapshot report - Increased decimals of gas components to 4 decimals.
				Added units to all the heading info
				Hides DP information when using frequency meters
				Provides option to show flow time in either hours or minutes
	2.7	7/21/2006		Added Support for Live BS&W input
	2.6	8/14/2005		Data Verification screens was not updating live readings
				Calibration & Verification report rounding Atmospheric pressure value
	2.5	5/16/2005		Corrected Program Variable Validation (did not allow for display variables)
	2.4	3/16/2005		Added Daylight Saving Time (DST)
				Validate Config File Schema to prevent opening wrong file types
	2.3	2/11/2005		Added Additional flow control for modem connection
				Increased Meter Test Report Resolution
	2.2	2/10/2005		Added RTS/CTS/DTR Flow Control
	2.1	12/9/2004		New Turbine Diagnostic Feature
				Saves Calibration in configuration file
				Dial Up (Modem) Communications
	2.0	10/15/2004		Added new Audit Trail Codes for Analog Inputs
				Added Units to Flow Rate High/Low Limits
				Diagnostic Screen not showing Analog Out RTD Assignment Text
	1.0.0.18	9/3/2004		Support for Meter composition selection from other meter runs.
				Modbus Driver includes Auto Type and stores las values used.
	1.0.0.17	7/25/2004		Allow Switch Output to be used in Boolean Statements (2751-2753)
				Problem with PID Drop-down menu (some actions do not work)
				Added Battery Voltage readings and alarms
				Upgraded program variables to accept negative numbers
				Unable to clear Floating Modbus shift
	1.0.0.16	2/29/2004		Version 1.0.0.15 had problem Loosing Data entries due to changes in combo boxes
				Re-enable Switch # 4 - MicroMS4 is the only MicroMV that supports Switch 4
				Added Last 10 Samples to Leak Detection Test and corrected decimal places on report
	1.0.0.15	1/26/2004		Disabled Switch # 4 for user selection
				Added additional wait time to improve communications
				Disable parity selection for RTU Modbus mode
	1.0.0.14	11/25/2003		Able to poll floating registers with different HI/LO and byte length configurations.
				Add Spare Assignment (Number 1) in status inputs.
				Add Modbus Driver Window
				Added Custom Flow Units, so customer can add its own units to the reports.
				Venturi C Override had wrong decimal places
				Override values were being clear when downloading the configuration
				Enable analog input expansion without having to configure slave units
	1.0.0.13	9/8/2003		Add Third Frequency Input Selection in AGA7
				Add V-Cone Pipe and Cone thermal coefficients
				Change Calibration Windows for a more user-friendly way
	1.0.0.12	7/11/2003		Add Liquid Correction at 20°C
	1.0.0.11	5/9/2003		Add Calibration and Verification Report
				Add Copy of PC Time to FC time with a button
				Image Download Window Upgrade
				Ability to configure Meter Well Test Offline
				Tank Leak Test - Database and data adquisition revision
				Do Not Allow 0 as Modbus ID
				Change Location of Gas Chromatograph Window to main menu
				Removed Station Total Selection (This feature is not available)
	1.0.0.10	4/14/2003		Added Leak Detection Application
				Moved SG/API entry to Meter Data Menu (For Liquid Applications)
	1.0.0.9	2/25/2003		Allowed Atmospheric Pressure in KPAs to be above 100
				Added Multithreading Communications - Improved serial and Ethernet response
				Slave units configuration screens revised
				Liquid Application in Barrels or Cubic Meters supported.
				Supports TCP/IP Communications besides ModbusTCP
				Meter Data and Others Settings windows were rearranged
	1.0.0.8	1/22/2003		Exporting Configuration to Text File Capability
				Help Information Update for Slave Units and Chromatograph
				Added Floating Point Mode (2/4 Bytes and (HI/LO) or (LO/HI) Mode support)
	1.0.0.7	12/19/2002		Supports mass flow Foxboro meters as slaves
				Supports different flow units for each Meter
				Supports Gas and Liquid Meters in the same unit
				Was unable to change Analog Output ranges.
				Corrected Hourly Report - Split hours by day
				Added ability to download image files to applications other than MicroMS4
	1.0.0.6	11/25/2002		Able to configure Slave Communications being Offline
				Able to configure Chromatograph Offline
				Added Rx, Tx communication indicators
				AGA8 Detailed Entry recalculates total percentage automatically.
				Typo in AGA8 Detailed Method components
	1.0.0.5	11/6/2002		Was Unable to Calibrate in Full Span (Two-point Calibration)
	1.0.0.4	10/18/2002		Modified Meter Test to suit for Customer Needs.(Meter Testing new features).
	1.0.0.3	10/14/2002		Changed Crystal Report Engine Program to improve reliability
				Was showing Override Stars for disable Meters
				Found Problem with the Snapshot variable definition causing memory problems
				Solved Crystal Reports Engine Issue
				Added Units to the Last Month Report
				Did not show Atm. Pressure and ID units accordingly with units system (metric/us)
				Added Spare Input values in Snapshot report
				Added Program Variables Statements and Tags
	1.0.0.2	9/12/2002		First Full Release.
	1.0.0.1	8/1/2002		Start working in the Application
				Beta Version